Nokia E60 SIP Account Setup using PBXES (NAT support)

Prerequisites

• Nokia E60 (SW version 1.0610.02.15 RM-49)
• SIP account (I have musimi.dk). Ensure that no SIP client is connected directly to the account. Create an extra extension at pbxes.org instead. This solved a problem for me when connecting through the Nokia E60.
• Tested with Linksys WRT54GS

Procedure

PBX account

• Goto http://www.pbxes.org
• Create an account

PBX extension

• Select Extensions -> Add Extension -> SIP Account
• Extension Number: 200 (must be 200 or above)
• Display Name: 200 (same as above)
• Outbound CID:
• language: english
• Password: <pbxes_ext_password> (password which is used on Nokia E60, e.g. 1234)
• Voicemail & Directory: disabled
• Submit and select extension number from left menu
• dtmfmode: auto
• audio bypass: no
• dial: SIP/<pbxes_account_name>-200 (If your PBX account name is john this would be dial:SIP/john-200).
• Click submit button. Read the red message banner at the top of the screen. Click the part that says APPLY.
• When selecting the trunk there is a mobile option. This is set to the default option: no.

PBX Trunks

• Select Trunks -> Add Trunk -> Add SIP Trunk
• Trunk Name: Musimi
• Outbound Caller ID: <musimi_account_number> (8-digit phone number)
• Maximum Channels:
• language: english
• dtmfmode: auto
• audio bypass: no
• context: from-pstn
• username: <musimi_account_number>
• password: <musimi_account_password>
• SIP Server: musimi.dk
• Dial Rules:
• Dial Rules Wizards: pick one (i.e. leave un-touched)
• Outbound Dial Prefix:
• Click submit button. Read the red message banner at the top of the screen. Click the part that says APPLY.

PBX Incoming Calls

• Select Incoming Calls
• Select Extension: 200 <200> under regular hours AND after hours
• Under Override Incoming Calls Settings select no override (obey the above settings)
• Click submit button. Read the red message banner at the top of the screen. Click the part that says APPLY.

Inbound Routing

• Select Inbound Route -> Add Incoming Route
• Trunk Name:
• Caller ID Number:
• Privacy Manager: No
• Digital Receptionist:
• Select Extension: 200 <200>
• Voicemail:
• Ring Group:
• Queue:
• Callthru PIN:
• Click submit button. Read the red message banner at the top of the screen. Click the part that says APPLY.

Outbound Routing

• Select Outbound Routing -> Add Route
• Route Name: Musimi
• Route Password:
• Extension:
• Dial Patterns: XX. (X-X-dot) (You may need to add +XX. or +45|XX. if you have international prefixes in your phone book)
• Dial rules wizards: pick one (i.e. leave un-touched)
• Trunk Sequence: SIP/Musimi
• Click submit button. Read the red message banner at the top of the screen. Click the part that says APPLY.

PBX Status

• Select Status
• You should see 200:200 under Extensions and musimi.dk under Trunks, both with a green button light.

Nokia E60 SIP Settings

• Profile Name: PBX
• Service Profile: IETF
• Default Access Point: <nokia_e60_data_access> (e.g. WLAN)
• Public user name: sip:<pbxes_account_name>-200@pbxes.org (e.g. sip:john-200@pbxes.org).
• Use Compression: No
• Registration: Always on
• Use Security: No
• Proxy Server Address: sip.pbxes.org
• Realm: pbxes.org
• Username: john-200
• Password: <pbxes_ext_password> (e.g. 1234 as selected above)
• Allow Loose Routing: Yes
• Transport Type: UDP
• Port: 5060
• Registrar Server Address: sip:sip.pbxes.org
• Realm: pbxes.org
• Username: john-200
• Password: <pbxes_ext_password> (e.g. 1234 as selected above)
• Transport Type: UDP
• Port: 5060